 |
In order to provide the suspension cables for a Vulcan Offshore Hammer, the following dimensional data are provided for bar and suspension heads.
| HAMMER |
DIMENSION (SEE FIGURE), INCHES |
||||||
|
Bar and Suspension Heads |
Suspension Head Only |
||||||
| A | B | C | D | E | F | G | |
| 010 | 3 1/4> | 4 | 4 1/2 | 7 | - | - | - |
| 014/016/140C | 4 1/4 | 5 | 5 | 7 1/2 | - | - | - |
| 020/030/530/200C | 4 1/2 | 6 | 6 | 7 1/2 | 2 1/8 | 3 | 21/2 |
| 040/340/540/400C | 5 1/2 | 7 | 8 | 9 | 2 7/8 | 5 | 2 7/8 |
| 060/360/560/600C | 6 1/2 | 8 | 7 5/8 | 10 | 2 7/8 | 6 | 3 1/2 |
| 3100/5100 | 6 1/2 | 8 | 7 3/8 | 10 | 4 | 6 | 3 1/2 |
| 5150 | 7 | 7 1/2 | 9 3/4 | 10 | 4 7/8 | 7 1/2 | 5 |
| 6300 | 8 | 10 | 6 1/4 | 12 | 5 | 6 1/2 | 4 1/2 |
Note: The suspension head dimensions for the 520 and 535 are identical to the 020. The dimensions for the 5110 is the same as the 060.
This entire site Copyright© 1997-2008 Don C. Warrington. All rights reserved.
Website maintained by Positive Infinity and hosted by 1 and 1 Internet.
